RoboRamp · Threshold ramp for robot vacuums
The ramp that gets your robot vacuum over the doorway patti.
A modular ramp you place against the raised marble sill between rooms. Your robot climbs it on its own and cleans the whole house. Four heights, from ₹2,499, made in India.
A robot vacuum can climb a step of about 20 mm. The marble patti in most Indian doorways is 18 to 25 mm. So the robot cleans one room, bumps the sill, and turns back. RoboRamp fixes that.
Drag to rotate
The product
A low ramp your robot treats like floor.
It starts paper-thin, rises gently to the height of your patti, and stays put on silicone pads. Three pieces click together. No glue, no drilling.
- 4 heightsfor pattis 17–36 mm tall
- 480 mmwide, extendable for wide doors
- Gentlenever steeper than 14°
- Made in Indiatough PETG plastic
Some photos show custom-sized ramps we made to order for customers across India. If your patti is outside the four standard heights, contact us and we'll make one for you.
Design
Designed around the wheels.
A curve, not a wedge.
A flat wedge is steepest right where the robot is heaviest. RoboRamp starts almost flat so the bumper doesn't catch, rises through the middle, and levels out before the sill. On the H30, the steepest point is 12°.
Sloped ends.
Both ends slope down to the floor, so a robot arriving at an angle still rolls up. Fine grooves across the surface give the wheels grip.
Seamless joins.
The three pieces lock together from underneath. From above it looks like one piece, and the wheels can't feel the join.
Paper-thin front edge.
Just over 1 mm thick and rounded, so nothing catches on it, not a wheel, not a toe. Silicone pads underneath keep it flat and in place on marble or tile.
Set-up
Two minutes. No tools, no adhesive.
- 1
Click
Lay the pieces face down and press a key into each join until it clicks.
- 2
Pad
Stick the silicone pads into the round recesses underneath.
- 3
Place
Turn it over and push it against the patti. Done.
Choose your height
Measure once.
Stand a ruler on the lower floor and read the height at the top of the patti. Measure the width of the door opening. Set both below and we'll pick your size. Need something outside these sizes? We make custom ramps on request.
- Steepest point10.1°
- Kit width800 mm
- In the box5 pieces · 8 keys · pads
Specifications
| Size | Patti height | Steepest point | Average slope |
|---|
- Width
- 480 mm
- Wide doors
- Add 160 mm per extra piece
- Custom sizes
- Made to order on request; contact us with your measurements
- Depth
- 170 mm
- Front edge
- 1.2 mm, rounded
- Material
- PETG plastic: tough, waterproof, doesn't warp in summer heat
- Strength
- Fine to walk on
- Finish
- Matte ivory; textured underside
- In the box
- 3 ramp pieces, 4 keys, silicone pads, quick-start card
- Works with
- Roborock, Dreame, Ecovacs, Xiaomi, iRobot, Eufy, Narwal and most other robot vacuums*
- Made in
- India. Ships in 2–4 working days
*Brand names belong to their owners and are used only to describe compatibility. RoboRamp is not affiliated with them.
Fit guarantee
Wrong size? We swap it free within 15 days.
Free shipping
Tracked delivery across India, in recyclable packaging.
1-year warranty
If it cracks or warps in normal use, we replace it.
GST invoice
UPI, cards and net banking. Invoice with every order.
Questions
Which height should I choose?
Pick the size that matches your patti, or up to 3 mm lower. Never taller. The size finder above does this for you.
My patti is raised on both sides. What do I need?
Choose "Raised patti, both sides" in the size finder. You get two ramps, one for each side, at 10% off.
Will it scratch or stain my marble?
No. It rests on soft silicone pads and nothing is glued to the stone.
Does it work with mopping robots?
Yes. The slope is gentle enough for mopping robots too. Wipe the ramp now and then if your robot mops.
My patti is taller than 36 mm, or an unusual shape.
Contact us with a photo and the measurements. We make custom-sized ramps to order; many of the ramps in our photos were made this way for customers across India.
Will the ramp move when the robot climbs it?
No. The silicone pads grip marble and tile. For very slippery stone, washable gel tape works too.
Can I walk on it?
Yes. It's solid underfoot and the front edge is rounded, so it won't catch a toe.
Is it 3D printed?
Yes, in tough PETG plastic, then checked and finished by hand. Look closely and you'll see fine layer lines. That's how we make it to order in India, in four sizes, at this price.
How long does delivery take?
Made to order and shipped in 2–4 working days, then 2–5 days in transit depending on your PIN code.
What's the return policy?
Unused ramps can be returned within 7 days for a full refund. Wrong size? We swap it free within 15 days.